PROPERTIES High quality adhesive mortar, ideal for installing natural or artificial stones, decorative bricks and ceramic tiles on walls. APPLICATIONS Suitable for installing stones exhibiting zero slip. Installation can be done on interior walls, offering great initial strengths. INSTRUCTIONS FOR USE Check that the surface is clean, free of dust, oil and loose materials. Mix using an electrical drill at low rpm, mixing almost 6-7 liters of clear water per each 25 Kg bag. Allow the mixture to mature for 5-10 minutes and then mix again without adding water. Spread evenly the adhesive on the substrate using a toothed spatula. Install the stone. Stone must be applied on mixture must within 20 minutes after spreading the adhesive, before the creation of a superficial film Application temperature: from +5ο C to +30ο C. It is highly recommended not to use the adhesive in extreme weather conditions of frost or heat. CONSUMPTION Approximately 2-4 kg/m2, depending on the application surface PACKAGING Paper bag 25 Kg STORAGE Store in its original packaging, in roofed area protected from frost and moisture for up to 12 months after production date.